The machine can detect whether the tire is leaking or the specific point of air leakage.
Use the water immersion method to detect.
First inject a proper amount of water into the storage iron drum, then put the pre-filled
tire into the wire cage. Turn on the air source and then pull the cylinder's down switch, the piston rod moves downwards and Drive the wire cage to sink into the water until the tires are all immersed in the water. If a
bubble is found, it is a leak point here, and you need to mark it with a marker. After the front side has been inspected, pull the cylinder's ascending switch to raise the wire ( cage to the highest position, take out the tire
and turn it back into the wire cage, and use the same method to detect the other side of
the tire.
Car Tire Test Tank(AA-TTT820)
Tank: Dia 960mm ;
Depth:480mm
Tire cage: Dia 820mm ;
Height 350mm
Tire size: Max dia 800mm;
Max tire width 300mm
Audited Supplier 
){kind=link}